Differential temperature and relative humidity sensor
0. Contents
Zen Sensor
Zen Probe
1. Add your Zen
Within the Cuby app, click on the menu in the top left corner and select the "Sensors" option."
Tap the "+" sign to add a new sensor.- Locate the QR code on the back of the Zen sensor.
- Scan the QR code with your phone. The app will activate your phone's camera, so you’ll need to grant permission if prompted.
- Once linked with Cuby, you’ll be able to configure your sensor (Assign a name, Set up notifications, Schedule alerts, or reassign it to another Cuby)."
2. Placement and Installation
Directly on the AC
You can place the Zen on top of the air conditioner and position the probe (black cable) towards the bottom of the unit, at the air outlet, passing it under the cover.
Specific Area
You can place Zen in a specific area where you want to have more precise control of temperature and humidity (without the probe).
For this feature, you need to enable the "Replace temperature reading" option in the app.
Conditions of Use
To ensure proper operation and extend the product’s lifespan, the following conditions must be met:
-
Relative Humidity: The product must not be exposed to humidity levels above 90% for prolonged periods, as this may affect its performance and reliability.
-
Heat Exposure: The product should not be placed near heat sources (stoves, radiators, ovens, or other equipment that generates excessive heat).
-
Direct Sunlight: Avoid continuous exposure of the product to solar radiation, as it may alter the operating temperature and damage its internal components.
Failure to comply with these conditions may reduce the device’s lifespan or cause malfunctio