Aria

Smart Wall Control for Air Conditioners

0. PACKAGE CONTENTS

Aria

2x AA Batteries

Screw and anchor

Removal accessory

 

For the following installation, you will need: 

1.- Drill

2.- iOS or Android smartphone

3.-WiFi connection

4.-Phillips screwdriver

5.-Hammer

 

1.- Add your Aria

Make sure that the Cuby G4 to which the Aria will be linked is in your account.

In the main menu of the Cuby Smart app, select the sensors option.

Select the + sign to add a new sensor. Scan the QR code with your phone.

---

There is an alternative method to view Aria's QR code

Press the Cuby Smart logo at the bottom of the glass panel for 4 seconds, and the QR code will appear on the screen.

---

Select the Cuby you want to link with the Aria. You can link only one Aria to a single Cuby, and each Cuby can have only one Aria. However, other controls and sensors can be linked to multiple Cubys, and a single Cuby can have multiple sensors.

2.- Installation

Remove the glass panel

To install the Aria on the wall, the glass panel needs to be removed.

Locate the slot at the edge of the glass as shown in the image.

Insert the removal accessory and leverage it upwards; carefully remove the glass panel.

 

---

Additional QR code

Remove the batteries located on the back of the glass panel to expose the QR code, which you can also scan.

---

 

Position the Aria base on the wall where it will be installed and mark the 4 holes with a pencil.

Using a drill and the correct bit (3/16 inch for the kits we provide), make the 4 holes where the screws will go, ensuring they are deep enough.

Insert the anchors into the holes you made.

Screw the Aria's back cover to the wall with the arrow on the base pointing upward, as shown in the image.

Place the glass panel onto the base

Align the bottom edge of the glass as shown in the image.

First, insert the edge into the slot of the Aria base installed on the wall. (1)

Push the top part to secure it onto the Aria base (2) until you hear a click. (3)